Present project is designed using 8051 microcontroller to avoid railway accidents happening at unattended railway gates, if implemented in spirit. This project utilizes two powerful IR transmitters and two receivers; one pair of transmitter and receiver is fixed at up side (from where the train comes) at a level higher than a human being in exact alignment and similarly the other pair is fixed at down side of the train direction. Sensor activation time is so adjusted by calculating the time taken at a certain speed to cross at least one compartment of standard minimum size of the Indian railway. We have considered 5 seconds for this project. Sensors are fixed at 1km on both sides of the gate. We call the sensor along the train direction as ‘foreside sensor’ and the other as ‘aft side sensor’. When foreside receiver gets activated, the gate motor is turned on in one direction and the gate is closed and stays closed until the train crosses the gate and reaches aft side sensors. When aft side receiver gets activated motor turns in opposite direction and gate opens and motor stops. Buzzer will immediately sound at the fore side receiver activation and gate will close after 5 seconds, so giving time to drivers to clear gate area in order to avoid trapping between the gates and stop sound after the train has crossed.
The same principle is applied for track switching. Considering a situation wherein an express train and a local train are traveling in opposite directions on the same track; the express train is allowed to travel on the same track and the local train has to switch on to the other track. Two sensors are placed at the either sides of the junction where the track switches. If there’s a train approaching from the other side, then another sensor placed along that direction gets activated and will send an interrupt to the controller. The interrupt service routine switches the track. Indicator lights have been provided to avoid collisions. Here the switching operation is performed using a stepper motor. Assuming that within a certain delay, the train has passed the track is switched back to its original position, allowing the first train to pass without any interruption. This concept of track switching can be applied at 1km distance from the stations.
The project is simple to implement and subject to further improvement.
Gate Control:
Railways being the cheapest mode of transportation are preferred over all the other means .When we go through the daily newspapers we come across many railway accidents occurring at unmanned railway crossings. This is mainly due to the carelessness in manual operations or lack of workers. We, in this project has come up with a solution for the same. Using simple electronic components we have tried to automate the control of railway gates. As a train approaches the railway crossing from either side, the sensors placed at a certain distance from the gate detects the approaching train and accordingly controls the operation of the gate. Also an indicator light has been provided to alert the motorists about the approaching train.
Track Switching
Using the same principle as that for gate control, we have developed a concept of automatic track switching. Considering a situation wherein an express train and a local train are travelling in opposite directions on the same track; the express train is allowed to travel on the same track and the local train has to switch on to the other track. Indicator lights have been provided to avoid collisions .Here the switching operation is performed using a stepper motor. In practical purposes this can be achieved using electromagnets.
sir pls send the details of this project
sir,
This seems to be an interesting project. So can u kindly guide me with the details of this project?
hey i lik tis project pls send me all details so that i can paper presentation in my college
sir pls can u send me full details abt tis
Please send me the complete details including description & circuit diagrams, so that i can do it as a project in final year.
Please send me the complete details including description & circuit diagrams, so that i can do it as a project in final year.
Please send me the complete details including description & circuit diagrams, so that i can do it as a project in final year.i want to do this project
sir,
This seems to be an interesting project. So can u kindly guide me with the details of this project?
Plz send me the whole detail of dis project…i want to make dis project
as a my final year project…
you have done a good job
we r really impressed with your work
Plz send complete information about this project
respected sir,
please send me the details of the project
Pls sent me Ckt Dia of Automatic Railway Gate Control & Track Switching using microcontroller……………..PLs Pls……..
Hello sir, am a mechanical engineer.First i wish u for this project. I really say congrats to u.I like your idea. May i know the cost of the project and the detail of the project. I know u r a nice person. Surely u will send the detail to me i know. Thank u mr.Nice guy
Respected sir,
plz send details of tis project,its cost nd materials required. plz send sooon my exhi is on 30th august.
urs faithfully ,
annanya
sir
i would like to knw d details of this projct.. i would be realy thankful to u,, pls send me the
details of the project,, n hw much wil it cost?
Plz send me the code and other details on this project..i need this for my final year project..plzz
sir will u please give me the details of this project. i am realy
interested in this project
sir
i would like to know the details of this project..im interested
in this project..please send me the complete information of this project..
Sir I cannot get your project what you did. please if there is any video relating
to this project then please help me so that I can also try for any further improvement
sir,
please send me details of this project.
sir want to know the details about this project and this projected planted are not
sir,
you have created a very interesting project….
please send me all the details of this project…..
thank you
sir,
your project is very good,,
i need some help from you sir
sir,i am final year student and i need more information of this project
sir, i m final year student and i wil work on this project very soon plz send me more information
please send in the details of the project..
looking 4wd for ur reply
hello sir i am a final year student i electrical engineering pls can you send me the circuit diagrams i would like to use it as my project topic.i would be grateful if my request is granted
sir please send me the circuit diagram
i m working on this project and have an another idea. but before that i want to know every detail of this. so pls send me the details along with ckt diagram.
sir… i want to do this project..
so please send the circuit diagram of
Automatic Railway Gate Control & Track Switching to me..
please send it to me sir..
i think gates on both sides should be closed but how if we go with this……………
sir give me full circuit diagram and parts list
Plz send me the code and other details on this project..i need this for
my final year project..plzz
Sir, i have selected this as my final year project. Iam from Electronics and Communications field. So please send me the code, flowchart and all other necessary information regarding this project. I hope i’ll get the positive response from you..
please send me the circuit diagram and other details….i want prof my
talent in my cloge
please send me information on safety requirement on our product…
It is a interesting project.i am taking this project for study.please send the relevant details about this project
please send me circuit diagram and other details so that i can use this
for my final year project and possibly at the earliest…
Hello sir this is kobinath.i like your project very much and i like to do the same project for my final year.so kindly send the circuit diagram and oter details.
Sir i m interesting 2 make dis project.
Plz send me details which is required 2 make it.
sir… I like this project… I,m doin final yr ECE.. I want to do this
project.. Send me the details of this project
hi sir…i am interested in doing this project as my final yr project… can u send me the circuit diagram and details……..
Sir please forward all the details of this project on my mail.
I am Final year Engineering student. I want this project. please this
is byheart requrst to u. pleast…
Thank you!
hii sir i m ranjith pursuing my b.tech final yr am doing this project as mini can u send the details of these project
GOOD MORNING .SIR. I NEED THE FULL DETAIL OF THE PROJECT AND PPT PROJECT.PLES SEND ME ALL THE PROJECT LIKE CKT DIA,COMPONENT LIST ETE QUICKLY ON MY ID.
Sir I am a plus two student.
Sir I am intrested in this project as my electronics project of the year in school.sir could you please send me more details on compenants required , and circuit diagrams..
— thank you jai hind
http://www.ujjual.us@gmail.com
Sir, i have selected this as my final year project. I am from Electronics and Communications field. So please send me the code, flowchart and all other necessary information regarding this project. I hope i’ll get the positive response from you..
i want full details for this project
sir tih project is awsm……
pls send me the details of this project….