Present project is designed using 8051 microcontroller to avoid railway accidents happening at unattended railway gates, if implemented in spirit. This project utilizes two powerful IR transmitters and two receivers; one pair of transmitter and receiver is fixed at up side (from where the train comes) at a level higher than a human being in exact alignment and similarly the other pair is fixed at down side of the train direction. Sensor activation time is so adjusted by calculating the time taken at a certain speed to cross at least one compartment of standard minimum size of the Indian railway. We have considered 5 seconds for this project. Sensors are fixed at 1km on both sides of the gate. We call the sensor along the train direction as ‘foreside sensor’ and the other as ‘aft side sensor’. When foreside receiver gets activated, the gate motor is turned on in one direction and the gate is closed and stays closed until the train crosses the gate and reaches aft side sensors. When aft side receiver gets activated motor turns in opposite direction and gate opens and motor stops. Buzzer will immediately sound at the fore side receiver activation and gate will close after 5 seconds, so giving time to drivers to clear gate area in order to avoid trapping between the gates and stop sound after the train has crossed.
The same principle is applied for track switching. Considering a situation wherein an express train and a local train are traveling in opposite directions on the same track; the express train is allowed to travel on the same track and the local train has to switch on to the other track. Two sensors are placed at the either sides of the junction where the track switches. If there’s a train approaching from the other side, then another sensor placed along that direction gets activated and will send an interrupt to the controller. The interrupt service routine switches the track. Indicator lights have been provided to avoid collisions. Here the switching operation is performed using a stepper motor. Assuming that within a certain delay, the train has passed the track is switched back to its original position, allowing the first train to pass without any interruption. This concept of track switching can be applied at 1km distance from the stations.
The project is simple to implement and subject to further improvement.
Gate Control:
Railways being the cheapest mode of transportation are preferred over all the other means .When we go through the daily newspapers we come across many railway accidents occurring at unmanned railway crossings. This is mainly due to the carelessness in manual operations or lack of workers. We, in this project has come up with a solution for the same. Using simple electronic components we have tried to automate the control of railway gates. As a train approaches the railway crossing from either side, the sensors placed at a certain distance from the gate detects the approaching train and accordingly controls the operation of the gate. Also an indicator light has been provided to alert the motorists about the approaching train.
Track Switching
Using the same principle as that for gate control, we have developed a concept of automatic track switching. Considering a situation wherein an express train and a local train are travelling in opposite directions on the same track; the express train is allowed to travel on the same track and the local train has to switch on to the other track. Indicator lights have been provided to avoid collisions .Here the switching operation is performed using a stepper motor. In practical purposes this can be achieved using electromagnets.
SIR, , I want the full details of “AUTOMATIC CROSSING GATE” . I AM WORKING AT THIS PROJECT BUT I HAVE NO FULL DETAILS . PLZ SEND THIS PROJECT INFORMATION AT MY ID – jitendrasharnagat22@gmail.com IT IS MY COLLEGE ASSIGNMENT. THE LAST DATE OF SUMITTED THIS PROJECT IS 26 SEP 2013. SO PLZ SENT DETAILS QUICKLY.I AM GRATEFUL TO YOU. THANKING YOU SIR
Sir plz send me the important detail of Automatic railway gate controller as soon as..plz sir..my email id-deshmukhsneha1994@gmail.com
sir,its a good project iam working on this project plz send me this information to my mail id kalpana.mamatha@gmal.com
sir,
I want full description of Automatic Railway Gate Control & Track Switching project.
plz send me as soon as possible. I am doing this as my minor project .so please send me the details of this project with circuit diagram, circuit diagrams of 8051 interfacing with stepper motor, IR sensors interfacing with 8051 ,full description, component list and program code to my mail id. So if u kindly send me the detail required for this project then i will be grateful to you. thanking you…
i want ckt diagram and c code of this project.plz send it to my email id
sir i need ur help.i want this project using 8051 microcontroller and its proper coding please send all the related information to my mail account ,this would be a great help thanj you very much sir
SIR, , I want the full details of “AUTOMATIC CROSSING GATE” . I AM WORKING AT THIS PROJECT BUT I HAVE NO FULL DETAILS . PLZ SEND THIS PROJECT INFORMATION AT MY ID – modimihir55@gmail.com IT IS MY COLLEGE ASSIGNMENT. THE LAST DATE OF SUMITTED THIS PROJECT IS 26 SEP 2013. SO PLZ SENT DETAILS QUICKLY.
Sir.I am interested in this project.Please,send me the full information along with Physical Construction to my mail id.
sir, i want to know which sensors which you used .CAN PLEASE SEND ME REPLY TO MY EMAIL
my id:- bethanamudi7@gmail.com
sir, i am intrested to do this project ,plz provide me the complet details about the project in my mail
sir,
i am doing the project railway automation .but i did not get output in programing section .i am using 8051 .so please send the programing part to my mail id neelimackd@gmail.com.sir my presentation on 1st october .plesse send sir.
plz mail me its code pllzz
mail the code at eyshikaagarwal@yahoo.co.in
Sir, I want full details about “automatic railway gate”.It’s my project for 12th std.
please send the details to ‘ks.sugan6@gmail.com’
sir please can you send code for this project on my mail.
please send me the code and circuit diagram for this project beacuse i want to do this project .pleaseeeeeeeeeeee
please send me the code and document of this project.i would like to do it.
Sir , please send me the code and the circuit schematic diagram of this project “Automatic railway gate control and track switching using micro controller “. I would like to do it.
Sir , please send me the code and the circuit schematic diagram of this project “Automatic railway gate control and track switching using micro controller “. I would like to do it.
Which motor we have to put here
sir, please send the schematic and code for the project”automatic railway gate control using 8051″
please provide the source code for the microcontroller of this project send it to the mail id parascharya93@gmail.com
Give me the dateil for railway traking system..daygram
Give me the dateil for railway traking system..and daygram….this is my BCA..sad(system anlais and deigain )project sir. Thank you…
Sir , please send me the code and the circuit schematic diagram of this project “Automatic railway gate control and track switching using micro controller “. I would like to do it
plz send me full details
please send me the source for “automatic railway gate control” to my mail id umaranisenthilvelan@gmail.com
sir i am making this project. so please send me all the details of this. thanku so much in advance
sir could u pleaes mail the source code of automatic railway gate control track switching
I am doing job in Indian railway
Hello Admin I am happy to hear that.
This is my final year project
I need your help.
I want to learn more features.
I want to gain extra information.
Please Inbox to my Email: yoni.best2008@gmail.com
I need your help.
I already impressed to do this intersting project.
God bless you.
SIR, , I want the full details of “AUTOMATIC CROSSING GATE” . I AM WORKING ON THIS FINAL YEAR PROJECT BUT I HAVE NO FULL DETAILS . PLZ SEND THIS PROJECT INFORMATION AT MY ID zefilo8922@gmail.com
sir,
this is my major project. If you have report file of this project then please send it to my email id as soon as possible.
jp2kumar@gmail.com this my id i have report contact me
Sir plz send me details about this project
sir please send me full details about automatic railway gate and also the materials what we want to use where we have to get plz sir . iam studying aeronautical enginnering
sir am interested to do this project pls send me details of this project ,
please ,,,,,,,
sir am interested to do this project pls send me details of this project ,
please
Sir can you please send me the full instructions and materials required to make this model. Could you please send them as soon sa possible.
Sir, please send me this project details ,necessary circuit & program.