Remote control unit
This unit replaces the conventional switch boards. Fans, light and other equipments can be operated and controlled using remote control unit. Also, this unit can be used for opening and closing the gates at the pressing of a button on the remote control.
This circuit has two stages: a transmitting unit and a receiver unit. The transmitting unit consisting of an infrared LED and its associated circuitry. The receiving unit consists of a sensor and its associated circuitry. The IR LED emit infrared light switch is put on in the transmitting unit. To generate IR signal 555 IC based astable multivibrator is used. Infrared LED is driven through transistor BC 177.
In receiver section, the first part is a sensor, which detects IR pulses transmitted by IR-LED. When any key on the remote control handset is depressed, the output of IR sensor momentarily transits through low state. As a result the monostable is triggered and a short pulse is applied to the clock input (pin 14) of IC 7493, which is a counter IC. Thus Q1 output (pin1 &12) of IC 7493 becomes high and transistor T2 is forward biased to ON state and the relay is energized. These results in shorting of power supply contact to the bulbs or any equipments and thus switching ON the bulbs or any equipments.
Can you please send me the details of this project?
can u please send me the pcb drawing for each circuits fast pleaaaaaaaaaaaaase I neeeeeeeeed them???????
al-marsa87@hotmail.com
please mail the details to m_awan89@hotmail.com
hi,
i am interested in electronics house.so plz send me the related details of this projects.
nice project
I want to make it as a final year of my university project.pls send me details like circuit diagram, description, requirements,budget n physical view. pls my id: safayeth.bd@hotmail.com
plssssssssssssssssss
this is awesome project.please send me all pcb lay outs,circuit diagrams,lay out of circuits on house.functionong of remote controlled equipments.pls send me the full details about this project..thankuuuuu……my email id:rajeshkannapwf@gmail.com
I HAD FINISHED ALL THE BREAD BOARD CONNECTION ON THIS PROJECT, NOW I HAD TO PROCEED TOWARDS PCB DESIGN SO PLEASE SEND ME THE LAYOUT ON THIS PROJECT………..
SO PLEASE HELP ME MA EMAIL ID :punya_chettri@yahoo.com
Respected Person,
I am very intersted in smart house.
Please send me all detail related to smart house as soon as possible.
I shall be very thankful to you.
—mohit
sir,
i just want more abut electronic house concept
please relay on me,i want to make it my profession
sir,
i just want more abut electronic house concept
please send me this project . this is essential in now-days……..
Dear Sir,
I am so glad that I come across your site as I was looking for similar projects. It is very informative.
Please let me know if you have the layout and pcb details and if possible please mail the same to me to my above email. I will be ever grateful to you for that.
Thanks and warm regards,
Sushil Rao
hi, friend
this project is simply superb.iam very interested to know all details of the project.please send me the details please——–
bye.
i think i interested to do electronic house project…please send me as soon as possible about the details of this project including the circuit and the pic programming..thank you..
sir..
i’m really intrested in this project..hope u can mail me the whole details about this project ASAP..im very thankful if you give me a hand…
regards..
sir..
i’m willing to do this project..hope u can mail me the whole details about this project ASAP..im very thankful if you give me a hand…
regards..
Dear sir,
I am interested in ELECTRONIC HOUSE.please send circuit detail and more information…
pls……send me all information
hi.sir now i am in final year. i want to do this project sir.please send me the details about this project sir.i need layout,circuit diagram and all details to implement this project sir.please sir,send every details to me sir.
I saw this dude, he was wearing a leather jacket, and at the same time he was eating a hamburger and drinking a glass of milk. I said to him “Dude, you’re a cow. The metamorphosis is complete. Don’t fall asleep or I’ll tip you over.”
I am a student of b.tech(EC) final year
I’m interested in this project.
Can you please send me all the details and circuit diagram of this project with component list with its spacification.
I am a student of b.tech(EC) final year
I’m interested in this project.
Can you please send me all the details and circuit diagram of this project with component list with its spacification.
I am BCA 2year student from vinayaka mission university.
Please you can sent some C++ project,code.
anilvishwkrmabca@gmail.com
hi..
plz send me d details…
hi
You project is the best
Can you please send me all the details and circuit diagram of this project with component list with its spacification. I really need it for my final year project.
HI.
SIR.
i am be final year student i interested in this project please send detail of this project and also pcb layout for same.
I HOPE YOU SEND SOON.
THANKS SIR
DEAR SIR,
you have done a wonderful job. Please let me know if you have the layout and pcb details and if possible please mail the same to me on above mail.
thanx
How would it be possible to start the motor between specific hours of the day. As you know in city , power supply is available for a certain fix hours . I would like to have some idea from upon this.
*Water supply